WATERSHIELD 130 Roofing

With its unique production technology, it is produced as 3-layer from the upper and lower layer POLYPROPYLENE (PP) and interlayer POLYETHYLENE (PE) raw material. Watershield 110 Permeable waterproofing covers are heat resistant. The unique 3-layer technology has waterproof property, though it is open to vapour passage. It is a popular cover and is preferred in ROOFING applications.

 

APPLICATION

● In the roofing systems, in conjuction with variabilty in application, joints has to be closed with strips by using a 10 cm overlapping share.

● Packaging of the covers are 75m²-150m² and the area to be closed is 70m²-140m² in net. After unpacking the products, both the product and the ground must be cleaned from dust and dirt. Upper surface of the covers have to be closed at least within 1 month (30 days). (UV additive (Resistance to sunlight) can be increased up to order-request and can be left open for longer periods.))

● Clamped Roof Systems

● Supported And Unsupported, Ventilated And Non-ventilated Roof Systems

● Inclined Roof Systems

● Cover Under Tile

● Using Under Shingle

 

ADVANTAGE

● Strong And Durable Structure

● Vapour Passage

● Completely Waterproofing Cover

● Wind Blocking, Hot And Cold Air Efficiency

● Durable And Flexible

 

PACKAGE and STORAGE

Our products have 2 types of packaging dimensions, 75m² and 150m².

● 150cm (width) x 50mt(length) :75m²

● 150cm(width) x 100mt(length):150m²

*160cm x 50mt:80m²

*160cm x 100mt 160m²

Products can be stored on a dry and clean surface, if possible, on a pallet slightly higher than the ground, in a position horizontally or vertically. Storage areas and products have to be protected from sunlight.

 

 

TS EN 13859-1

Flexible sheets - For waterproofing - Descriptions and properties of sublayers –

Part 1: Used as sublayers for discontinuous roofing sheets

 

Product Technical Information

Description of Product:	Polypropylene + polyethylene based waterproofing cover used under disconti nuous roofing
Brend:	WATERSHİELD 130
Product Standart:	TS EN 13859-1: Flexible sheets - For waterproofing - Descriptions and characteristic features of sublayers – Part 1: Sublayers used for discontinuous roofing TS EN 13859-2: Flexible sheets - For waterproofing - Descriptions and properties of sublayers - Part 2: Used as sublayers for walls
Intended Purpose:	Buildings
Compliance Confirmation System:	3
Properties of Product	WATERSHİELD 130
Reaction Against Fire	E
Resistance Against Water Penetration	Class W1
Longitudinal Traction Resistance	575 N/5cm
Latitudinal Traction Resistance	305 N/5cm
Water Vapour Permeability	0,1 sd(m)
Water Vapour Diffusion Resistance Factor	145,0
Weight of Product (gr/m²)	130 gr/m²
Longitudinal Strain Failure	%96
Latitudinal Strain Failure	%100
Resistance against Longitudinal Tear	140 N
Resistance against Latitudinal Tear	205 N

---

---

---